COVID 19 

EU Shipping Guide

As of 06/01/2021, our website is fully operational and all orders will be processed and dispatched as promptly as possible. In the event of any significant delays in delivery, we will notify you.

We would just like to take this opportunity to thank all our customers for your continued support in these uncertain times.

We are once again shipping to EU Countries. We are anticipating some delays, but this is due to Coronavirus rather than the new trading terms. All supplies to EU customers are now Excluding VAT, this is now charged locally by the courier, on delivery. Please click here for our latest update



Yacht Devices YDEG-04 EVC/Vodia 8-pin Adaptor Cable

Yacht Devices YDEG-04 EVC/Vodia 8-pin Adaptor Cable

Yacht Devices YDEG-04 EVC/Vodia 8-pin Adaptor Cable 





This cable is intended to link a J1939 interface, part number YDEG-04N or YDEG-04R to the following engine types.


Connection to EGC Engines (Gasoline, 2005 and Later)

Note: If an EVC system is fitted, see the EVC section details.

The Device is compatible with all EGC engines (8.1Gi-H, 8.1GXi-G, 8.1OSi-D and many other).

Device is connecting to EVC/Vodia 8-pin Deutsch connector with adaptor cable (see Appendix F, available in accessories at ordering page). The cable has male and female connectors both (Y-connector), so you can use diagnostics equipment with Gateway connected.

Note: you can use supplied 6-pin plug as a dust cap for the free Device connector.


Connection to EDC III (EMS2), EDC IV (Diesel)

Note: If an EVC system is fitted, see the EVC section details.

To connect with EDC III (EMS2) engines, an EVC/Vodia 8-pin adaptor cable (see Appendix F, available

in accessories on the ordering page) is required. The adaptor cable must be connected to the engine’s 8-pin Deutsch connector, or in line (cable has a built-in Y-connector) between the ECU (Engine Control Unit)

and the CIU (Control Interface Unit).

Connection to EVC-A MC (EVC-MC, EVCmc) Engines (2004-2006, Diesel and Gasoline)

Connection can also be made using an EVC/Vodia 8-pin adaptor cable (see Appendix F, available

in accessories on the ordering page). The Y-connector of this cable must be connected between the ECU (Engine Control Unit) and the cable to the HIU.

However, the preferred method of connection is using a  EVC-A MC 12-pin C5:ENGINE adaptor cable


Write a review

Please login or register to review
  • Brand: Yacht Devices
  • Product Code: Yacht Devices YDEG-04 EVC/Vodia 8-pin Adaptor Cable
  • Availability: In Stock
  • RRP Inc VAT: £26.10


  • Our Price: £25.00
  • Ex VAT: £20.83