as of 28/09/2021


COVID 19 

EU Shipping Guide

Our website is fully operational and all orders will be processed and dispatched as promptly as possible. We are experiencing delays in sourcing some products from various manufacturers. In the event of any significant delays in delivery, we will notify you.


Shipping to EU Countries is now re-instated. Due to VAT rules imposed by the EU, there is now a minimum order value of £135 ex vat and excluding shipping for orders to be processed.

All supplies to EU customers are now Excluding VAT, this is now charged locally by the courier, on delivery. Please click here for our latest update



Victron Energy Phoenix Sinewave Multiplus 12v 800va Inverter with 35Amp Charger - PMP121800000

Victron Energy Phoenix Sinewave Multiplus 12v 800va Inverter with 35Amp Charger - PMP121800000

Victron Energy Phoenix Sinewave Multiplus 12v 800va Inverter with 35Amp Charger - PMP121800000


Victron Phoenix Sine wave multi plus - 12V, 800VA inverter with 35 amp charger, IP21 enclosure

The new style MultiPlus is set to replace the earlier MultiPlus Compact range. It is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure.

Proven reliability

The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverter is short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

PowerControl - Dealing with limited generator, shore side or grid power (800VA/1200VA)

With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.

PowerAssist - Boosting the capacity of shore or generator power (800VA/1200VA)

Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.

High start-up power

Needed to start high inrush loads such as power converters for LED lamps, halogen lamps or electric tools.

Search Mode

When Search Mode is ‘on’, the power consumption of the inverter in no-load operation is decreased by approx. 70%. In this mode the Multi, when operating in inverter mode, is switched off in case of no load or very low load, and switches on every two seconds for a short period. If the output current exceeds a set level, the inverter will continue to operate. If not, the inverter will shut down again.

Programmable relay

By default, the programmable relay is set as an alarm relay, i.e. the relay will de-energise in the event of an alarm or a pre-alarm (inverter almost too hot, ripple on the input almost too high, battery voltage almost too low)

Remote on / off / charger on

Remote operation can be implemented by connecting a switch to the three pole connector



Write a review

Please login or register to review
  • Brand: Victron Energy
  • Product Code: Victron Energy Phoenix Sinewave Multiplus 12v 800w/35-16
  • Availability: In Stock
  • RRP Inc VAT: £586.80


  • Our Price: £459.00
  • Ex VAT: £382.50