Navico NMEA0183/Video Interfacing Cable - 000-00129-001
Navico NMEA0183/Video Interfacing Cable - 000-00129-001
Cable required to Interface Simrad and B&G displays to NMEA0183 equipment or to feed in composite video signals.
Connect up to two composite video cameras to each display unit using the supplied Video / Data cable. This connects to the VIDEO IN port on the rear of the display. Note that the video images will not be shared with another unit via the network. It is only possible to view video on the unit connected to the video source. Only connect NTSC and PAL video sources.
To exchange NME0183 data, the display has a NMEA0183 serial port, providing both an input and an output. The port uses the serial RS422 (balanced) and RS232 (single ended) standards and can be configured in the software for different baud rates, up to 38,400 baud. NMEA0183 sentences output by the unit can be individually turned on or off .
Compatible with:
Simrad
- NSE8 & 12
- NSS
- NSS Evo2
- NSS Evo3
- NSS Evo3s
- NSO
B&G
- Zeus
- Zeus Touch
- Zeus2
- Zeus3
- Zeus3S
8 pin female connector (head unit end) to 4 bare wires (Blue,Green,Orange,Yellow) for NMEA0183 and 2 RCA female connectors (Red and Green) for Video input port one and two.
- Black
- 2 meter / 6.5 foot cable