Service is pretty much back to normal.

We are however noticing delays obtaining some items due to manufacturers also working under restrictions.

In the event of any significant delays, we will notify you.

Victron Energy Battery Protect BP-100 - BPR000100400

Victron Energy Battery Protect BP-100 - BPR000100400

Victron Energy Battery Protect BP-100 - BPR000100400


The Victron Energy Battery Protect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine. 
12/24V auto ranging:

The Battery Protect automatically detects system voltage 
Fully programmable with simple ‘countdown’ program:

The Battery Protect can be set to engage / disengage at several different voltages with a simple ‘count down’ program.
Over voltage protection:

To prevent damage to your sensitive loads due to over voltage, the load is disconnected whenever the DC 
voltage exceeds 16 V respectively 32 V. 
Ignition proof:

No relays but MOSFET switches, and therefore no sparks. 
Delayed alarm output:

The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 15 seconds. Starting the engine will therefore not activate the alarm. The alarm output is an open collector output to the negative (minus) rail, max. current 500 mA. The alarm is typically used to activate a buzzer and/or lamp. 
Delayed load disconnect:

Only 1 minute after the alarm has been activated will the load be disconnected. If battery voltage increases to the connect threshold within this minute (after the engine has been started for example) the load will not be disconnected. 

  • Maximum continuous load current: 100A
  • Peak current: 600A
  • Operating voltage range: 6 –35 V
  • Current consumption: 1.5mA when on / 0.6mA when off or low voltage shutdown
  • Alarm output delay: 12 seconds
  • Load disconnect delay: 90 minute
  • Default threshold - Disengage: 10,5V or 21V Engage: 12V or 24V
  • Weight: 0.5 kg
  • Dimensions (HxWxD) mm: 59 x 42 x 115

Write a review

Please login or register to review
  • Brand: Victron Energy
  • Product Code: Victron Energy Battery Protect BP-100
  • Availability: In Stock
  • RRP Inc VAT: £66.00

  • Our Price: £54.00
  • Ex VAT: £45.00