Navico Electronic Fuel Flow Sensor - 000-11517-001
Navico Electronic Fuel Flow Sensor - 000-11517-001
Fuel Flow Sensor
Please note: this is for Gasoline/Petrol only, one required per engine and up to 3 engines supported.
Outputs:
- Fuel Flow
- Tank Fuel Used
- Trip Fuel Used
- Seasonal Fuel Used
Easy Intergration into NMEA2000 network
Cable Length: 10 Ft
Fuel Line Diameter: 3/8" (9.5 mm) Inside Diameter
Flow Rate Measured: Optimized for 0.6-45 Gal/hr but can measure outside these values
Added Back Pressure to the fuel system: 0.5 PSI at 20 Gal/hr; 1 PSI at 40 Gal/hr
Installation Location: Above the max level of the fuel tank, in-line after the fuel filter and any Y's or T's in the line
Fuel Type: Gasoline/Petrol only. The Fuel Flow Sensor does not operate diesel engine fuel systems.
Hole required to route through a bulkhead: 22mm (7/8")
Multiple Fuel Flow sensors possible: Yes
Comes with: The Fuel Flow Sensor, N2K T and 2 (two) 1" hose clamps