Maretron Pressure Transducer 0 to 1.5 PSI - PT01.5PSI01

Maretron Pressure Transducer 0 to 1.5 PSI - PT01.5PSI01

Pressure Transducer 0 to 1.5 PSI, or tank depth up to 41" of water (1.0m)

All Maretron pressure transducer assemblies are equipped with a ¼” NPT male threaded fitting. Install the pressure transducer to a ¼” NPT female fitting on the system or tank to be monitored with a maximum torque of 133 to 177 in-lbs (15 to 20 Nm). If you are monitoring a system where pressure spikes or transients will occur, or where the pressure will exceed the maximum pressure rating of the pressure transducer, install a Pressure Snubber (PT-SNUB-01) onto the system being monitored first, then install the pressure transducer to the female port on the pressure snubber.