Actisense NMEA2000 to Wi-Fi Gateway - W2K-1

Actisense NMEA2000 to Wi-Fi Gateway - W2K-1

Actisense NMEA2000 to Wi-Fi Gateway - W2K-1


transfers data from an NMEA2000 backbone to any device (e.g. laptop, tablet or smartphone) connected to it via Wi-Fi.

It has built-in conversion of NMEA2000 messages into NMEA0183 sentences thus allowing a wide variety of vessel data (e.g. position, speed, course, wind speed, depth, engine data, AIS messages etc.) to be shared with NMEA 0183 compatible software applications running on connected devices.

All the data received (or a selected subset) can be logged to its internal micro SD card for later downloading to use for analysing the voyage. This is very useful for analysing race data, generating logbooks, diagnosing problems or even sharing your voyage details. Approximately 16 days of data can be stored on the pre-installed industrial grade micro SD card, which can be upgraded should the user require more storage.

The W2K-1 has the legendary Actisense “Reliability Built In” along with useful diagnostic LEDs, internal antenna, enhanced password security, full certification and all packaged in an extremely rugged IP67 case.

    NMEA 2000 to Wi-Fi Gateway and voyage data recording in one device

    Converts NMEA 2000 to / from NMEA 0183 (streamed over Wi-Fi)

    Supports both TCP and UDP and streams data using up to three separate data servers

    Data protocols are selectable to be compatible with a huge range of navigation software and Apps

    8GB high reliability Industrial micro SD card is pre-installed

    Approximately 16 days Voyage data recording

    Remote Firmware upgradability

    Diagnostic LEDs for NMEA 2000 bus activity and Wi-Fi Status

    IP67 rated ruggedized case

    Top end Wi-Fi allows unit to simultaneously work as an Access Point and connect to existing Wi-Fi networks in Client mode

    Low power – uses less than 2 LEN from NMEA 2000 bus

    2.4GHz radio with integrated internal antenna supporting 802.11 b/g/n (up to 150Mbps)

    Automatically measures and reports the NMEA 2000 Bus Voltage

    User manual embedded on the device – accessible via browser

    Each device has unique default SSID and Password for enhanced security

    Power Supply

    Supply Voltage (NMEA 2000 Port) 9 to 36V DC

    Supply Current (NMEA 2000 Port) 70mA (avg.) @ 12V DC

    Load Equivalent Number (LEN) 2

    Supply protection Continuous reverse polarity protection and transient overvoltage protection to 40V

    Wi-Fi Radio

    Compatibility IEEE 802.11 b/g/n

    Speed 802.11n up to 150Mbps

    Frequency Band 2.4GHz ~ 2.5GHz

    Max Output power 20 dBm

    Antenna Integrated internal antenna

    Range (Open space) 30 meters

    Security WPA / WPA2 / WEP


    IP support Supports TCP and UDP broadcast

    Data servers Three separate data servers

    Data protocols NMEA 0183, Raw CAN, BST-N2K

    Security SSID and Password configurable (Unique defaults per device)


    Power LED Blue

    NMEA 2000 Tx LED Orange

    NMEA 2000 Rx LED Green

    Status LED Yellow

    micro SD card 8GB Industrial Grade, FAT32


    Housing Material (body) Polycarbonate

    Housing Material (endcaps) PBT

    NMEA 2000 Connector M12 Male (A polarised) connector moulded into case

    NMEA 2000 Connector Material Nickel plated brass

    Weight 80g

    Dimensions 106mm (L) x 73mm (W) x 24mm (H)


    Environmental Protection IP67

    Operating Temperature -20°C to +55°C

    Storage Temperature -30°C to +70°C

    Recommended Humidity 0 - 93% RH

    Approvals and Certifications

    NMEA 2000 Certified

    RoHS and REACH compliant

    RF Module certification FCC / CE-RED / IC / TELEC / KCC / SRRC / NCC

    EMC IEC 60945 (sections 9 & 10), EN 301489-1, EN301489-17

    Radio EN 300 328

    Guarantee 3 years

    Write a review

    Please login or register to review
    • Brand: Actisense
    • Product Code: Actisense NMEA2000 to Wi-Fi Gateway - W2K-1
    • Availability: In Stock
    • RRP Inc VAT: £204.12

    • Our Price: £175.00
    • Ex VAT: £145.83