Simrad TP32 Tillerpilot
Related products
Simrad IS20 Wind SystemThe IS20 analog wind system includes the IS20 high performance SimNet Wind Vane. |
|
Simrad Tiller Pin and Socket TPPK29Simrad Tiller Pin and Socket TPPK29 |
|
Simrad TillerPilot Cantilever Socket - CB1Simrad Tillerpilot Cantilever socket. |
|
Simrad TillerPilot Extension Rod 120mm - PRE120Simrad Tillerpilot Pushrod extension pieces and Cantilever socket. |
|
Simrad TillerPilot Extension Rod 150mm - PRE150Simrad Tillerpilot Pushrod extension piece 150mm long |
|
Simrad TillerPilot Extension Rod 300mm - PRE300Simrad Tillerpilot Pushrod extension piece 300mm long |
|
Simrad TillerPilot Extension Rod 30mm - PRE30Simrad Tillerpilot Pushrod extension piece - 30mm long |
|
Simrad TillerPilot Extension Rod 60mm - PRE60Simrad Tillerpilot Pushrod extension piece - 60mm long |
|
Simrad TillerPilot Extension Rod 90mm - PRE90Simrad Tillerpilot Pushrod extension piece - 90mm long |
|
Simrad TP10 Tiller PilotSimrad TP10 Tillerpilot to suit yachts upto 3,700kg (8,140lbs) and up to 10m (33ft) |
|
Simrad TP22 TillerpilotSimrad TP22 Tillerpilot to suit yachts upto 5000 kg (11,000 lbs) and a length of up to 11 m (36 ft), |
|
Simrad TPPK26 Feedback Kit - SPARE PARTSimrad TPPK26 Feedback Kit |
Simrad Tillerpilots combine attractive styling with storm-proof weather protection to withstand the toughest conditions at sea. Designed to use minimum energy whilst providing maximum thrust, they provide fast and silent, in short, outstanding performance.
SimNet capability
The TP32 is SimNet-enabled, allowing intelligent data sharing across the revolutionary, NMEA2000-compatible SimNet high speed bus. The increased data flow provides maximized performance, whilst simplified interfacing (plug & play) supports straightforward installation.
NMEA direct connection
Alternatively, if SimNet-capable instruments are not available, the TP32 can be connected directly to most NMEA0183 GPS receivers via the built-in NMEA interface.
TP32
With a peak thrust of up to 85kg (187lbs) and a lock-to-lock speed of 4.7 secs with a 20kg (44lbs) load the TP 32 exhibits a truly powerful performance. For larger vessels of up to 6,300 kg (14,000 lbs) and a length of up to 12 m (39 ft).
The TP32 can be connected to a SimNet Control Network, which will allow advanced data sharing across the system, speeding up the data flow and thus enhancing performance. Information provided via the SimNet data bus enables the autopilots to automatically steer to apparent wind or, if GPS information is available, to steer to the next programmed waypoint.
HR22 Hand Remote
The HR22 Remote Control enables the helmsman to move around the cockpit and make quick adjustments to most functions from any position on board; for example, from under the spray hood in rough weather. The Remote Control can be connected at any convenient port on the SimNet system.
Principal Modes:
Steer to Compass
In its standard operating mode the TP22/TP32 will lock onto the current heading with just one press of the Auto key. Adjustments to course (in 1? or 10? increments) are made using the Port and Starboard keys.
Autotack
With just a single command the autotack feature steers the boat through a tack automatically.
Steer to Wind
To hold a chosen wind angle when under sail, the TP22/TP32 must either be connected to a Simrad Instrument System with Wind function, or to a Simrad Active Masthead Unit. Course adjustments (in 1? or 10? increments) can be made using the Port or Starboard key.
Steer to GPS
The unique Simrad Nav lock feature means you can instruct the Simrad TP22/TP32 to steer to the currently active GPS waypoint with just a single key stroke.
Tillerpilot installation:
The Simrad Tillerpilots should be installed so that they are level and at a 90? angle to the tiller when it is amidships and the pushrod is in the midstroke position. The pilots are factory preset to be mounted on the Starboard side, but can be configured for Port-side mounting.
The dimensions given should be adhered to as closely as possible. A range of fitting accessories are available to accommodate correct installation. For further guidance on how to install a tillerpilot, see the "Cockpit Autopilot Selection" guide which can be found in the "tips" section of the website.
| Description | RRP Ex-VAT |
Our Price Ex-VAT |
Our Price Inc-VAT |
|
|---|---|---|---|---|
| Simrad TP32 Tillerpilot by Simrad | £535.83 | £427.25 | £512.70 |

