Simrad TP10 Tiller Pilot
Related products
 |
Simrad Tiller Pin and Socket TPPK29Simrad Tiller Pin and Socket TPPK29 |
 |
Simrad TillerPilot Cantilever Socket - CB1Simrad Tillerpilot Cantilever socket. |
 |
Simrad TillerPilot Extension Rod 120mm - PRE120Simrad Tillerpilot Pushrod extension pieces and Cantilever socket. |
 |
Simrad TillerPilot Extension Rod 150mm - PRE150Simrad Tillerpilot Pushrod extension piece 150mm long |
 |
Simrad TillerPilot Extension Rod 300mm - PRE300Simrad Tillerpilot Pushrod extension piece 300mm long |
 |
Simrad TillerPilot Extension Rod 30mm - PRE30Simrad Tillerpilot Pushrod extension piece - 30mm long |
 |
Simrad TillerPilot Extension Rod 60mm - PRE60Simrad Tillerpilot Pushrod extension piece - 60mm long |
 |
Simrad TillerPilot Extension Rod 90mm - PRE90Simrad Tillerpilot Pushrod extension piece - 90mm long |
 |
Simrad TP22 TillerpilotSimrad TP22 Tillerpilot to suit yachts upto 5000 kg (11,000 lbs) and a length of up to 11 m (36 ft), |
 |
Simrad TP32 TillerpilotSimrad TP32 Tillerpilot, robust and long lasting pilot for tiller steered yachts upto 6,300 kg (14,000 lbs) and a length of up to 12 m (39 ft). |
 |
Simrad TPPK26 Feedback Kit - SPARE PARTSimrad TPPK26 Feedback Kit |
Simrad Tillerpilots combine attractive styling with storm-proof weather protection to withstand the toughest conditions at sea. Designed to use minimum energy whilst providing maximum thrust, they provide fast and silent, in short, outstanding performance.
TP 10
Designed for tiller-steered sailboats up to 3,700kg (8,140lbs) and up to 10m (33ft) in length, the TP10 is a high power, easy-to-operate autopilot, which comfortably outperforms all challengers in its class.
With a peak thrust of 65 kg (143 lbs) and a lock-to-lock speed of 8 secs with a 20 kg (44 lbs) load, the TP10 shows just what can be achieved with advanced design and engineering.
Principal Modes:
Steer to Compass
In its standard operating mode the TP22/TP32 will lock onto the current heading with just one press of the Auto key. Adjustments to course (in 1? or 10? increments) are made using the Port and Starboard keys.
Autotack
With just a single command the autotack feature steers the boat through a tack automatically.
TP10 does not have any interfacing capability. It works purely from its internal compass.
Tillerpilot installation:
The Simrad Tillerpilots should be installed so that they are level and at a 90? angle to the tiller when it is amidships and the pushrod is in the midstroke position. The pilots are factory preset to be mounted on the Starboard side, but can be configured for Port-side mounting.
The dimensions given should be adhered to as closely as possible. A range of fitting accessories are available to accommodate correct installation. For further guidance on how to install a tillerpilot, see the "Cockpit Autopilot Selection" guide which can be found in the "tips" section of the website.
- 2 Year Warranty
- Power Consumption: Standby 0.06 amps
- Auto 0.5 amps (typically)
- Supply Voltage: 12V d.c..
- Drive System: screw thread
- Operating Stroke: 250 mm (10 inches)
- Lock-to-Lock Time: No Load 6.9 secs
- 10 kg Load 7.0 secs
- 20 kg Load 8.0 secs
- 30 kg Load 10.0 secs
- Peak Thrust 65 kg (143 lbs)
- Mounting, reversible, port or starboard
- Length and Displacment: TP10: 10m (32.81’) 3700Kg (8140Ibs)
| Description | RRP Ex-VAT |
Our Price Ex-VAT |
Our Price Inc-VAT |
|
|---|---|---|---|---|
| Simrad TP10 Tillerpilot by Simrad | £325.00 | £262.53 | £315.04 |