Simrad AP50 Control head
Related products
Simrad AP50 Analogue Output Unit - AD50 - 20213088The AD50 provides Analog or Proportional control of a rudder, by either continuous voltage, or Danfoss PVEM valve signal. Set-up from AP50 Control Unit and communicates via RobNet. |
|
 |
Simrad AP50 Junction Box - J50 Standard - 20214011Simrad J50 Junction unit - 20214011 for Reversable and solenoid operated drive units. 10-40 VDC (10A) |
 |
Simrad AP50 Junction Box - J50-40 High Power - 20214029The Junction box is basically the heart of the Autopilot system. All the sensors, control heads and the drive terminate back at this point. This one for AP50 systems. |
 |
Simrad AP50 Wheelmarked Pilot Starter Bundle - 000-10120-001Simrad AP50 Wheelmarked Pilot Starter Bundle - 000-10120-001. Includes AP50 head, J50 Junction Box and RF300 Rudder Sensor. |
Simrad CD100A Magnetic Course Detector UnitSimrad CD100A Magnetic Course Detector for a conventional magnetic compass. |
|
Simrad CDI35 Compass Interface unitSimrad CDI35 Compass Autopilot Interface unit to connect autopilot to magnetic compass with CD100A or CD109 Course Detector. |
|
 |
Simrad FU50 Follow up steering leverSimrad FU50 Follow up steering lever |
 |
Simrad JS10 Joystick Steering Lever (NFU)JS10 is a neat non-follow-up joystick control for the wheelhouse or the flybridge. |
Simrad NI300X NMEA interface unitSimrad NI300X NMEA Interface |
|
 |
Simrad R3000X Remote ControlA small handheld remote control with two push buttons for power steering or course selection (port and starboard) |
 |
Simrad RC25 Fluxgate Compass with rate sensorSimrad RC25 Fluxgate compass with rate sensor. |
Simrad RF45X Rudder Feedback unitsSimrad RF45X Rudder Feedback unit |
|
 |
Simrad RFC35 Fluxgate CompassThe RFC35 is a basic high speed fluxgate compass sensor. |
 |
Simrad RI35 Mk2 Rudder Angle IndicatorMk2, 45°-0-45° Rudder Angle Indicator, Operates on RF300, RF45, RF45X and RF100 feedback units. |
Simrad S35 NFU Steering Lever 23241227Simrad S35 NFU Steering lever |
|
Simrad TI51 Bow Thruster InterfaceThe TI51 Thruster Interface is designed to provide control signal for operating one thruster in an AP50 system. |
The AP50 is made and tested according to the European Marine Equipment Directive 96/98, complying with the highest level of tests existing for non-military marine electronic navigation equipment.
The AP50 autopilots from Simrad represents a step forward in auto-pilot technology, providing fishing boats, work boats and yachts with a range of new features.
The system can be expanded with a large selection of type approved options and accessories.
The AP50 will provide precise steering, using the least amount of rudder movements necessary. Save fuel and wear on the steering gear with the Automatic Sea state Filter, Automatic rudder offset, Adaptive speed response, Second compass for course monitoring and Adaptive pump speed.
Simrad's WORK mode has been taken to the next level in the AP50 autopilot. The Auto Work mode is an automatic steering mode to be used under operational conditions, different from those normally found when a vessel is in normal transit on a pre-set course.
Examples are trawling, towing, being towed, trolling on one engine, slow speed etc. As GPS/chart plotters and Electronic Charting Systems (ECS) has become standard equipment on most vessels today, this WORK feature has now been implemented in the AP50 navigation mode resulting in a Nav Work mode. Combined with a bow-thruster, navigational steering is now possible at low speeds previously considered unsuitable for autopilot use.
| Description | RRP Ex-VAT |
Our Price Ex-VAT |
Our Price Inc-VAT |
|
|---|---|---|---|---|
| Simrad AP50 Control Head 20214045 by Simrad | £1,313.00 | £1,134.62 | £1,361.54 |