Rutland HRSi Charge Controller
Related products
 |
2 Core DC Power Cable 2 x 3.00mm²2 Core DC Power Cable 2 x 3.00mm² |
 |
2 Core DC Power Cable 2 x 4.50mm²2 Core DC Power Cable 2 x 4.50mm² |
 |
BP Solar 125w Rigid Framed Solar Panel - BP3125JRigid Framed 125w Solar Panel manufacturerd by BP Solar - BP3125J |
 |
BP Solar 40w Rigid Framed Solar Panel - BP340JRigid Framed Solar Panels manufacturerd by BP Solar |
 |
BP Solar 5W Rigid Framed Solar Panel - SX305MRigid 5W Solar Panel Multimount frame manufacturerd by BP Solar - SX305M |
 |
BP Solar 65w Rigid Framed Solar Panel - BP365JRigid Framed 65w Solar Panels manufacturerd by BP Solar BP365J |
 |
BP Solar 80w Rigid Framed Solar Panel- BP380JRigid Framed 80w Solar Panel manufacturerd by BP Solar - BP380J |
 |
Rutland 504 Wind ChargerIdeal for trickle charging batteries up to 100Ah. This latest model follows the success of its predecessors the Rutland 503 and the 500. |
 |
Rutland 504 Wind Charger + HRS503 Regulator + Cable BundleIdeal for trickle charging batteries up to 100Ah. This bundle includes the 504, a HRS503 Regulator and 10mtrs of cable. |
 |
Rutland 504 Wind Charger Marine Bundle PackPackage of all the main components you need to complete a marine 504 installation. Ideal for trickle charging batteries up to 100Ah. |
 |
Rutland 910-3 Windgenerator - 12VDCLand based wind generator with self furling tail to prevent over speed in high winds. 12VDC Version. |
 |
Rutland 910-3 Windgenerator - 24VDCLand based wind generator with self furling tail to prevent over speed in high winds. 24VDC Version. |
 |
Rutland 913 Wind Generator- 12VDCPopular 910mm diameter wind generator with high output and low wind speed requirements. 12v version |
 |
Rutland 913 Wind Generator- 24vPopular 910mm diameter wind generator with high output and low wind speed requirements. 24v version |
 |
Rutland 914i Wind Generatoruses Maximum Power Point Tracking technology to perfectly match the generator operation to the turbine speed thus achieving a highly efficient power output. |
 |
Rutland HRDi Charge ControllerCharge control and split charging for use with Rutland 503, 504, 913 or FM910-3 Windchargers and up to 160W of solar panel input in one system. |
 |
Rutland HRS503 Voltage RegulatorBasic voltage regulator for 503 windcharger. No LCD display and single output |
Marlec's HRSi Charge Regulator once again leads the small wind turbine industry in technology and product features. The HRSi conveniently brings together a Rutland Windcharger voltage regulator with an input for up to 160Watts of photovoltaic panels in a single easy to install device.
Multi-stage charge control delivers appropriate charge levels required to ensure your batteries get the maximum power they are able to retain and remain float charged.
- Width Modulation (PWM) regulation is now more finely controlled using the latest programmable microcontrollers. PWM regulation monitors battery voltage to prevent overcharge.
- As peak voltages are reached the HRSi tapers the input charge from the wind & solar chargers gradually reducing input to float stage level. This feature gradually reduces the speed of the turbine to an eventual "idle" thus extending the working life of the windcharger.
- As the battery discharges the wind turbine responds by increasing speed to deliver more power. Solar power is also tapered in the same way.
- Intelligent Microcontroller system is programmed to deliver bulk and float phase charging. This feature ensures that batteries are optimally charged, especially when unattended.
- LED indicators keep the user informed about battery voltage levels and charging status.
- Manual shutdown switch allows the user to stop the wind & solar chargers from delivering power to the battery if required. The windcharger slows to an "idle" in this mode.
- Easy to connect terminals to interface windcharger, solar panels & battery connection.
- Temperature compensation automatically adjusts the settings of the regulator to take account of varying temperatures thus ensuring maximum charging efficiency in all conditions.
- Built in blocking diode avoids conflict with other charging sources to the same battery.
- Automatic voltage detection for 12V or 24V systems
- Built-in charge fuse protects the wiring circuit in the event of accidental reverse polarity connection.
- User voltage programme feature allows resetting of voltage cut in levels. Requires a variable DC power supply.
| Description | RRP Ex-VAT |
Our Price Ex-VAT |
Our Price Inc-VAT |
|
|---|---|---|---|---|
| Rutland HRSi Charge Controller by Rutland - Marlec | £62.08 | £58.20 | £69.84 |