Specialists in Marine Electrical & Electronic Systems

• Contact
• Help
• Carriage & VAT
• RETURNS
• Tips
• Links

Subscribe to our newsletter for the latest special offers

Raymarine SPX 10 Autopilot Core Pack

Engineered for both power and sail vessels with 12 or 24 Volt DC electrical systems, the SPX-10 corepack is the “brains” of your Raymarine modular pilot system. Engineered for the demanding marine environment the SPX-10 course computer can drive any Raymarine Type 1 hydraulic, linear, or rotary drive system.

The SPX-10 corepack features an integrated rate-gyro processor as standard equipment. The rate gyro, combined with Raymarine’s exclusive AST (Advanced Steering Technology) software algorithms ensure razor-sharp course keeping under any sea conditions. The SPX-10 also offers the convenience of rudder reference-less operation as well as data connections for SeaTalk, SeaTalkng, NMEA 0183 and NMEA 2000 giving the SPX10 unprecedented connectivity.

Using SeaTalkng networking, connect your SPX 10 to the ST70 Colour Autopilot Controller and unlock exclusive features including programmable fishing patterns. SPX-10/ST70 combination allows you the freedom to work the bait while it smoothly handles the boat. Programmable patterns include circles, spirals, cloverleaf, figure 8, lazy-S, zigzag, box, box pattern search, and 180 or 360 degree turns.

The SPX-10 corepack includes course computer and fluxgate compass sensor. To complete your autopilot system you will need to add a Raymarine Type 1 autopilot drive and a compatible SeaTalk or SeaTalkng autopilot controller.

Additionally, a rotary rudder reference transducer M81105, can be fitted so that rudder position is shown. This can also improve the response of the autopilot on light weight sailboats and faster planing motorboats. See related products.

Connections
Inputs: Fluxgate compass, NMEA 0183 v2.3, SeaTalk, SeaTalkng, power, sleep switch and rudder position sensor
Outputs: NMEA 0183 v2.3, SeaTalk, SeaTalkng, drive motor, drive clutch
Steering drive compatibility: All Type 1 drives/pumps (excluding CR pumps) (drive voltage must match boat’s supply voltage)
Drive motor output: continuous 10A at supply voltage
Drive clutch output: 1.2A at 12/24V selectable
SeaTalk output: 2A at 12V (fuse protected at 2A)
SeaTalkng output: 2A at 12V (fuse protected at 2A)
NMEA 0183 v2.3 inputs/outputs: See relevant installation guide for received/transmitted NMEA 0183
NMEA fast heading output: HDG 10 Hz 0.1° resolution
Fuses: Standard automotive blade fuses
Power Terminals: 15A
SeaTalk Terminals: 2A

Environmental
Operating temperature: -10°C to 55°C (14°F to 131°F)
Non-operating temperature: -20°C to 70°C (-4°F to 158°F)
Relative humidity limit: 80%
Water protection: drip resistant when mounted vertically

General
Gyro: internal GyroPlus fitted onto circuit board as standard
Dimensions (W x H x D): 12.1" (307mm), 7.7" (195mm), 2.8" (70mm)
Weight: 2.2kg (4.85lbs)

Power
Nominal supply voltage: 12 or 24 V DC (fuse protected at 15A)
Operating voltage range: 10 V to 32 V DC
Power consumption (standby): 300mA

• Corepack includes course computer and fluxgate compass sensor.
• Compatible with all type 1 drives/pumps (excluding CR pumps).
• Programmable fishing patterns via ST70 autopilot head. Patterns include: circles, spirals, cloverleaf, figure 8, lazy-S, zigzag, box, box pattern search, and 180 or 360 degree turns.
• Built-in rate gyro provides the best possible performance.
• Advanced steering technology (AST) which intelligently monitors the yaw of the vessel and actually anticipates course changes as well as ensuring razor-sharp course keeping.
• AutoLearn function automatically understands the vessel's steering characteristics, simplifying calibration and allowing the vessel to constantly adapt to changing sea conditions.

Description	RRP Ex-VAT	Our Price Ex-VAT	Our Price Inc-VAT
Raymarine SPX 10 Autopilot Core Pack E12198 by Raymarine	£1,000.00	£843.75	£1,012.50