NASA AIS Engine bundled with NASA AIS Radar PC Software
Related products
Comar ASR100 Receive Only AIS Antenna SplitterInstallation is quick and simple with interconnecting cables supplied to link the AIS Receiver and the VHF to the ASR 100. |
|
Connector for VHF Radio's and AIS Receivers - BNC for RG58Selection of 50ohm RF connectors |
|
Connector for VHF Radio's and AIS Receivers - FME to BNC50ohm RF connector - FME to BNC |
|
Connector for VHF Radio's and AIS Receivers - PL259 for RG5850ohm RF connector - PL259 for RG58 |
|
EasyAIS AIS Receiver 2nd GenerationLatest version of the hugely popular AIS receiver. Revised electronics and improved connectivity makes this probably the best value AIS on the market |
|
Mains Power Supply for NASA AIS ReceiversMains Power Supply for NASA AIS Receivers |
|
NASA AIS (Automatic Identification System) Receiver SystemThe Nasa Marine AIS "Radar", is the first stand alone AIS receiver / plotter specifically designed for the leisure boat market. |
|
NASA AIS EngineNasa AIS engine, Now shipping advanced version 3. Receives ais transmissions and converts them to NMEA format for use with PC's and AIS capable Chartplotters. |
|
Nasa AIS Radar PC SoftwareWindows software to give "Radar" style display on a PC when combined with a Nasa AIS Engine |
|
Standard Horizon CP180E Colour Chartplotter with External GPS5 inch colour sunlight viewable C-Map MAX compatible chartplotter with AIS and fishfinder options with external GPS antenna. |
|
Standard Horizon CP180i Colour Chartplotters with Internal GPS5 inch colour sunlight viewable C-Map MAX compatible chartplotter with AIS and fishfinder options. With internal GPS antenna. |
|
Standard Horizon CP300E 7" Colour Chartplotter with External GPSC-Map MAX based colour chartplotter with large high resolution, 800 x 480, 7” display. AIS Compatible. CP300E 7" Colour Chartplotter with External GPS |
|
Standard Horizon CP300i 7" Colour Chartplotter with Internal GPSC-Map MAX based colour chartplotter with large high resolution, 800 x 480, 7” display. AIS Compatible. CP300i 7" Colour Chartplotter with Internal GPS |
|
Standard Horizon CP500E 12" Colour Chartplotter12" high definition colour chartplotter that uses C-Map's MAX cartography. AIS, echosounder and video input options. |
|
USB to Serial AdaptorAdaptor to allow connection of navigation equipment to PC's that do not have 9-Pin RS232 Serial ports via a spare USB port instead. |
|
V-Tronix AIS COM Commercial AIS AntennaCommercial grade AIS antenna is a dedicated omni directional antenna designed specifically for the narrow band frequency used by all vessel AIS transceivers. |
|
V-Tronix AIS Masthead Antennadedicated omin-directional narrowband antenna suitable for use with AIS transceivers. Designed to be light weight and offering minimal windage. |
|
VHF and AIS Connector - BNC-M to TNC-FSelection of 50ohm RF connectors |
All vessels over 300 tons and all passenger vessels are obliged to carry an AIS transponder. The Nasa AIS engine receives these transmissions an converts them to NMEA format for use with PC chart plotting programs and dedicated chartplotters.
The unit is supplied with a 12 volt power cable and a 9 pin serial computer cable. For convenience the engine can also receive NMEA information from a GPS receiver (at 4800 baud) which it then sends on to the display with the AIS data (at 38,400 baud).
NOW SHIPPING VERSION 3
Supplied with SeaClear II PC Plotter CD Software
The AIS Engine requires NMEA input from a GPS and a marine VHF antenna (not supplied). The antenna can be either a dedicated antenna or the output from an antenna splitter such as the EasyAIS splitter.
The AIS Engine is not watertight so it must be mounted in a position, which is dry at all times.
As few display units will have a socket for both a GPS receiver and an AIS Engine so provision has been made in the Engine to reply the GPS position.
SeaClear software is freeware and is given freely with the AIS Engine. It is a PC based chart plotter for Windows 2000/XP/NT/95/98/ME. With a GPS connected it displays the current position, speed, heading and other data on the screen. The chart is repositioned and new charts are loaded automatically as needed. Tracks may be saved to file for later reviewing and log book entries can be manually and automatically entered. Unlimited number of routes and waypoints can be created and used to assist the navigation. The screen area for charts is maximized with most functions accessed with the right mouse button. Zooming is provided with support for IntelliMouse wheel. SeaClear is created for nautical navigation but can probably be used for other navigation needs.
Version 2 includes improved connector layout for easier installation and indicator LED's for easy diagnostics.
- Operating frequencies - 162.025 and 161.975 mHz (2 Channel)
- Supply voltage - 10 to 16 volts DC
- Supply current - 43mA
- Messages relayed - 1, 2, 3, 4, 5, 11 and 21
- Antenna input - 50 ohm BNC
- Data converter - 9 pin "D" type
- Mounting - via two moulded flanges
- Dimensions - 115 x 100 x 30mm
- Output format - NMEA 2000/0183 (38400 Baud) VDM encapsulation string conforming to ITU-1371
- Required Input - NMEA RMC from GPS
| Description | RRP Ex-VAT |
Our Price Ex-VAT |
Our Price Inc-VAT |
|
|---|---|---|---|---|
| NASA AIS Engine with Seaclear and NASA AIS Radar Software by NASA | £117.88 | £96.32 | £115.58 |

