Johnson Viking Power 32 Waste Water Diaphram Pump - 24v
Related products
 |
Johnson Viking 16 Waste Water Diaphram Pump - 12VDCSpecifically designed to pump waste water, the Viking Power 16 is an ultramodern, single-chamber self-priming diaphragm pump that can be set up in several different pump/motor configurations. 12VDC Version. |
 |
Johnson Viking 16 Waste Water Diaphram Pump - 24VDCSpecifically designed to pump waste water, the Viking Power 16 is an ultramodern, single-chamber self-priming diaphragm pump that can be set up in several different pump/motor configurations. 24VDC Version. |
 |
Skin FittingsA range of 3 different size plastic skin fittings suitable for use with all the pumps we supply. |
Compact toilet handling and waste water pump
The Viking Power 32 diaphragm pumps have been designed to meet the rigorous demands of the world’s leading manufacturers of boats, recreational vehicles and busses.
Thanks to its single-chamber design and non-choke valves, the Viking Power 32, can be used to pump un-macerated sewage to a holding tank or transfer it onwards to a septic tank. The Viking Power Vacuum has double check-valves and can therefore also be used in vacuum toilet systems. Naturally, pumping ordinary shower or sink drain water or bilge water is no problem for the pump either.
Like the Viking Power 16, this new pump has been engineered with a ball-bearing supported transmission for long service life. The pump can not only be run dry, it can also handle a mixture of air and water without difficulty. The Viking Power 32/Vacuum provides maximum flow of 32 liters per minute and is self-priming up to a height of 2.5 meters.
Although powered by an electric motor, this pump can also be cranked by hand in an emergency.
The pump has been designed to prevent the leakage of unpleasant odors; and the Viking Power 32 Vacuum can be installed in a variety of different positions.
Built to last, yet priced competitively.
Design Features:
Capacity: 32 l/min (8.5 GPM) open flow
30 l/min (7.9 GPM) at 0.1 bar
Max head: 4 m (13.1 ft)
Max lift:
VP32: 2.5 m (8.2 ft)
Dimensions:
VP32: 277 mm long x 264 mm wide x 192 mm high
Ports: 38 mm diameter (1½")
Weight:
VP32: 5.0 kg (11.0 lbs)
Motor: 1.8 amp (24V) at 0.1 bar
12/24V DC (with built-in thermal protection)
Body: Nylon
Valves: Nitrile rubber
Diaphragm: Reinforced nitrile rubber
- Maximum flow 32 l/min
- Specifically engineered to pump black wastewater
- Uncompromising odor-prevention features
- Whisper quiet operation
- Self-priming
- High-impact glass-fiber reinforced nylon body
- Ball-bearing supported transmission
- Non-choke valves – no waste shredding required
- Pump head rotatable 360°
- Double check valves on Viking Power Vacuum
- Self-priming up to 2.5 meters (8.2 feet)
- Can be run dry and can pump air/water mixture
- Robust single diaphragm
- Electric motor with power-out, manual-crank backup
- Complies with ISO 15083 and small craft bilge pump
- standard for vessels above 12 m (39.4 ft)
| Description | RRP Ex-VAT |
Our Price Ex-VAT |
Our Price Inc-VAT |
|
|---|---|---|---|---|
| Johnson Viking Power 32 24V 13373-04 by Johnson Pumps | £310.61 | £223.64 | £268.37 |