Comar AIS-2-USB PC AIS Engine

Comar AIS-2-USB PC AIS Engine

Related products

Comar AIS-2-NMEA AIS Engine

Comar AIS-2-NMEA AIS Engine

Dual Channel Parallel synthesized AIS receiver designed specifically for the Leisure Marine

Comar ASR100 Receive Only AIS Antenna Splitter

Comar ASR100 Receive Only AIS Antenna Splitter

Installation is quick and simple with interconnecting cables supplied to link the AIS Receiver and the VHF to the ASR 100.

Connector for VHF Radio's and AIS Receivers - BNC for RG58

Connector for VHF Radio's and AIS Receivers - BNC for RG58

Selection of 50ohm RF connectors

Connector for VHF Radio's and AIS Receivers - FME to BNC

Connector for VHF Radio's and AIS Receivers - FME to BNC

50ohm RF connector - FME to BNC

Connector for VHF Radio's and AIS Receivers - PL259 for RG58

Connector for VHF Radio's and AIS Receivers - PL259 for RG58

50ohm RF connector - PL259 for RG58

VHF and AIS Connector - BNC-M to TNC-F

VHF and AIS Connector - BNC-M to TNC-F

Selection of 50ohm RF connectors

The AIS-2-USB is a Dual Channel Parallel synthesized AIS receiver designed specifically for the Leisure Marine, Fishing Boat and Vessel Monitoring market. It enables coastal stations, or boats sailing in busy shipping lanes, to receive AIS (Automatic Identification System) information being transmitted from Class ?A? transponders as fitted to vessels over 300 tons, and non-mandatory Class "B" transponders as fitted to small commercial and leisure craft.

Connected to the USB port of a PC the AIS-2-USB is powered from the port and transmits AIS data via USB to a compatible AIS display program. The information can be displayed on screen giving the skipper or harbour authority a visual interpretation of the name, position, course and speed of vessels within VHF range. This information is updated every 3 seconds to 6 minutes depending on speed and rate of turn, enabling the track of the vessels in range to be plotted.

The receiver is designed for use with a PC and is powered by the USB port. It is simple to install, connect a VHF antenna to the rear socket, plug the unit into your USB socket, install the USB drivers supplied on the CD and the unit is ready to receive AIS transmissions from vessels within VHF range.

Information received can be displayed on a PC by many third party AIS programs available giving the user a clear visual picture of other vessels in the vicinity.

Description RRP
Ex-VAT
Our Price
Ex-VAT
Our Price
Inc-VAT
Comar AIS-2-USB PC AIS Engine by Comar Systems £215.00 £185.44 £222.53