Comar AIS-2-NMEA AIS Engine
Related products
 |
Comar AIS-2-2000 NMEA2000 AIS EngineThe Comar AIS-2-2000 is a high performance, dual channel AIS receiver, designed specifically for integration into boats using a NMEA 2000 network. |
 |
Comar AIS-2-USB PC AIS EngineThe receiver is designed for use with a PC and is powered by the USB port. |
 |
Comar ASR100 Receive Only AIS Antenna SplitterInstallation is quick and simple with interconnecting cables supplied to link the AIS Receiver and the VHF to the ASR 100. |
 |
Comar CSD300 Colour AIS Displaydedicated colur AIS display designed for simple to use management, control and display of all AIS targets within VHF range. |
 |
Comar CSD300R Colour AIS Display with built in Receiverdedicated colur AIS display designed for simple to use management, control and display of all AIS targets within VHF range. |
 |
Connector for VHF Radio's and AIS Receivers - BNC for RG58Selection of 50ohm RF connectors |
 |
Connector for VHF Radio's and AIS Receivers - FME to BNC50ohm RF connector - FME to BNC |
 |
Connector for VHF Radio's and AIS Receivers - PL259 for RG5850ohm RF connector - PL259 for RG58 |
 |
VHF and AIS Connector - BNC-M to TNC-FSelection of 50ohm RF connectors |
The AIS-2-NMEA is a Dual Channel Parallel synthesized AIS receiver designed specifically for the Leisure Marine, Fishing Boat and Vessel Monitoring market. It enables boats sailing in busy shipping lanes, to receive AIS (Automatic Identification System) information being transmitted from Class ?A? transponders as fitted to vessels over 300 tons, and non-mandatory Class "B" transponders as fitted to small commercial and leisure craft.
The receiver is designed for use with Chart Plotters and is powered by the boats DC supply of 12/24 Volts. It is simple to install, connect a VHF antenna to the rear socket, connect the unit to your boats battery supply, connect the NMEA output to the NMEA input of your Chart Plotter and the unit is ready to receive AIS transmissions from vessels within VHF range.
Connected to a compatible dedicated marine Chart Plotter, the information can be displayed on screen giving the skipper or harbour authority a visual interpretation of the name, position, course and speed of vessels within VHF range. This information is updated every 3 seconds to 6 minutes depending on speed and rate of turn, enabling the track of the vessels in range to be plotted.
- Reception from both Class A and Class B vessels, plus Aids to Navigation.
- Operation from the boats electrics.
- Dual Parallel Receivers
- Power & Channel LEDs
- NMEA VDM Output
- Output at 38.4 K Bd
- Low power drain
- Size: 120 x 85 x 37
| Description | RRP Ex-VAT |
Our Price Ex-VAT |
Our Price Inc-VAT |
|
|---|---|---|---|---|
| Comar AIS-2-NMEA AIS Engine by Comar Systems | £199.00 | £171.64 | £205.97 |