Actisense NDC-4 NMEA Multiplexer
Related products
 |
Actisense NDC-4-A-USB NMEA Multiplexer and Autoswitchallows connection of up to five NMEA inputs to be multiplexed / combined in to one NMEA output. Preconfigured for AIS. Includes USB connection for PC Integration. |
 |
Actisense NDC-4-AIS Multiplexer and Autoswitchallows connection of up to five NMEA inputs to be multiplexed / combined in to one NMEA output. NDC-4-AIS pre-configured for 1 AIS Input, NMEA0183 inputs |
 |
Actisense NDC-4-ASW NMEA AutoswitchAutoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ... |
 |
Actisense NDC-4-USB NMEA MultiplexerThe Actisense NMEA Multiplexer / Combiner allows connection of up to five NMEA inputs to be multiplexed / combined in to one NMEA output. |
 |
Screened cable for NMEA interfacing - 2 core 100mtr drum2 core screened cable ideal for NMEA interfacing. 100mtr bulk drum |
 |
Screened cable for NMEA interfacing - 4 core per mtr4 core screened cable ideal for NMEA interfacing |
Multiplex or Autoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...
This Actisense™ NMEA Multiplexer / Combiner allows connection of up to five NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.
This approach offers these major advantages:
Completely removes the need for isolated power supplies - as the NDC-4 creates a full 2500v isolation barrier between it's inputs and each of it's ISO-Drive outputs
Enables the vessel owner complete access to all NMEA data sources, instead of the standard one device
Any problematic or unwanted NMEA sentences can be filtered out / blocked, to help intelligently reduce the NMEA data to a manageable amount and prevent data loops
Each NMEA input device is Opto-isolated from all other NMEA device in the system.
Significant reductions in installation cost (from reduced cable lengths and requiring only one NMEA cable to be routed around the bridge to supply the multiplexed NMEA data
The NDC-4 has two ISO-Drive outputs which are fully compatible with all standards: NMEA 0183 (RS422), RS485 and PC RS232 ports.
New feature: The autoswitching feature of the NSW-1 has now been added to the NDC-4, making it the single most feature rich Multiplexer available in the marine market. The NDC-4 can either operate in 'Combine mode' as before, or the new 'Autoswitch mode' to behave like the original Actisense NSW-1 Autoswitch product.
Electrical spike protection is provided as standard on all four input channels using opto-isolators. This protects any connected equipment from most system faults; a particularly valuable benefit as equipment requiring the most data, such as a PC or chart plotter, is often the most expensive to repair or replace.
The NDC-4 Data Multiplexer contains intelligent software that manages the multiplexing operation, allowing every input to have a chance of its data reaching the combined NMEA output. Tested up to and beyond a combined 400% loading of the four inputs.
Also available is NDC-4-AIS which is pre-configured for use with AIS receivers outputting at 38400 baud rate, so ideal for use with Raymarine C and E Classic series display's.
Click here to visit manufacturers website for full specification, manuals and downloads
- 5 NMEA 0183 data inputs, NMEA, & RS232 outputs
- Fixed Port Priorities and Baud rates
- Enables the vessel owner complete access to all NMEA data sources, instead of the standard one device
- Each NMEA input device is Opto-isolated from all other NMEA device in the system
- Significant reductions in installation cost (from reduced cable lengths and requiring only one NMEA cable to be routed around the bridge to supply the multiplexed NMEA data
| Description | RRP Ex-VAT |
Our Price Ex-VAT |
Our Price Inc-VAT |
|
|---|---|---|---|---|
| Actisense NDC-4 NMEA Multiplexer by Actisense | £180.81 | £153.69 | £184.43 |
