Actisense NDC-4-AIS Multiplexer and Autoswitch

Actisense NDC-4-AIS Multiplexer and Autoswitch

Related products

Actisense NDC-4 NMEA Multiplexer

Actisense NDC-4 NMEA Multiplexer

The Actisense NMEA Multiplexer / Combiner allows connection of up to five NMEA0183 inputs to be multiplexed / combined in to one NMEA0183 output.

Actisense NDC-4 NMEA to USB Conversion Cable

Actisense NDC-4 NMEA to USB Conversion Cable

Add on cable to convert an existig NDC-4 to a USB version

Actisense NDC-4-A-USB NMEA Multiplexer and Autoswitch

Actisense NDC-4-A-USB NMEA Multiplexer and Autoswitch

allows connection of up to five NMEA inputs to be multiplexed / combined in to one NMEA output. Preconfigured for AIS. Includes USB connection for PC Integration.

Actisense NDC-4-ASW NMEA Autoswitch

Actisense NDC-4-ASW NMEA Autoswitch

Autoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...

Actisense NDC-4-USB NMEA Multiplexer

Actisense NDC-4-USB NMEA Multiplexer

The Actisense NMEA Multiplexer / Combiner allows connection of up to five NMEA inputs to be multiplexed / combined in to one NMEA output.

Screened cable for NMEA interfacing - 2 core 100mtr drum

Screened cable for NMEA interfacing - 2 core 100mtr drum

2 core screened cable ideal for NMEA interfacing. 100mtr bulk drum

Screened cable for NMEA interfacing - 4 core per mtr

Screened cable for NMEA interfacing - 4 core per mtr

4 core screened cable ideal for NMEA interfacing

Multiplex or Autoswitch up to 5 NMEA devices to your PC, Chart-plotter, Radar, Autopilot and more, with NMEA 0183 HS compatibility and ISO-Drive ...

This Actisense™ NMEA Multiplexer / Combiner allows connection of up to five NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.

This approach offers these major advantages:
Completely removes the need for isolated power supplies - as the NDC-4 creates a full 2500v isolation barrier between it's inputs and each of it's ISO-Drive outputs
Enables the vessel owner complete access to all NMEA data sources, instead of the standard one device
Any problematic or unwanted NMEA sentences can be filtered out / blocked, to help intelligently reduce the NMEA data to a manageable amount and prevent data loops
Each NMEA input device is Opto-isolated from all other NMEA device in the system.

Significant reductions in installation cost (from reduced cable lengths and requiring only one NMEA cable to be routed around the bridge to supply the multiplexed NMEA data.

The NDC-4 has two ISO-Drive outputs which are fully compatible with all standards: NMEA 0183 (RS422), RS485 and PC RS232 ports.

New feature: The autoswitching feature of the NSW-1 has now been added to the NDC-4, making it the single most feature rich Multiplexer available in the marine market. The NDC-4 can either operate in 'Combine mode' as before, or the new 'Autoswitch mode' to behave like the original Actisense NSW-1 Autoswitch product.

Electrical spike protection is provided as standard on all four input channels using opto-isolators. This protects any connected equipment from most system faults; a particularly valuable benefit as equipment requiring the most data, such as a PC or chart plotter, is often the most expensive to repair or replace.

The NDC-4 Data Multiplexer contains intelligent software that manages the multiplexing operation, allowing every input to have a chance of its data reaching the combined NMEA output. Tested up to and beyond a combined 400% loading of the four inputs.

NDC-4-AIS is pre-configured for use with AIS receivers outputting at 38400 baud rate, so ideal for use with Raymarine C and E series display's.

Link to manufacturers webpage for full specification, manual and downloads

Description RRP
Ex-VAT
Our Price
Ex-VAT
Our Price
Inc-VAT
Actisense NDC-4-AIS Multiplexer by Actisense £180.81 £153.69 £184.43

Actisense NDC-4-AIS Multiplexer and Autoswitch